Harrisburg Area's Premier Fire Service Supplier Since 1971

Holik Safire Structural Glove
Holik Safire Structural Glove
  • Load image into Gallery viewer, Holik Safire Structural Glove
  • Load image into Gallery viewer, Holik Safire Structural Glove

Holik Safire Structural Glove

Regular price
$109.99
Sale price
$109.99
Regular price
$119.99
Sold out
Unit price
per 
Shipping calculated at checkout.
SKU: 8083-11-64N
Product ships from the Manufacturer in 3-5 days.

Structural Firefighting Gloves

The Safire gloves result from years of production and development experience. Holik is bringing an all textile fully washable, highly protective gloves that provide great comfort, heat protection and excellent dexterity. “NO EXCUSES”.

Outer shell:
Back: DuPont™ Nomex® fabric combined with ceramic coating. The coating on the back of fingers increases the abrasion resistance and longevity.

Palm: Meta-aramid / para-aramid knitted fabric with silicone coating. Anti-slip reinforcement for secure grip.

Fourchettes (material between fingers): DuPont™ Nomex® fabric.

SAFIRE - Holík Gloves For Firefighters 1. Aramid shell fabric
2. Non-woven aramid fabric
3. PORON®XRD™
4. Porelle® membrane.
5. Aramid lining


Inner layers:

  • Aramid non-woven fabric - increases heat, abrasion and cut resistance.
  • “Hidden protection” – a layer of Poron®XRD material increasing heat resistance and absorbing shocks. XRD technology disperses impact energy efficiently and protects back of the hand.


Moisture barrier:

  • Porelle® P540 polyurethane FR membrane.
  • Creates a barrier against water, chemicals, bloodborne pathogens as well as bacteria.
  • The membrane is highly breathable, flexible, sensitive and firm.


Lining:
Aramid lining with increased thickness – increased heat protection, the lining will not stretch or pull out, easy donning and doffing even when wet. 6. The lining is brushed on reverse side allowing air inside the glove increasing heat protection.

Additional features and benefits:

  • Advanced design and stitching techniques provide for improved dexterity and allowing the lining to stay in place by attaching it at each fingertip.
  • 3D style glove – fourchettes between fingers improve flexibility, dexterity and grip.
  • Breathability, sensitivity, flexibility unlike any other structural gloves available.
  • Anatomical cut for perfect fit.
  • Special index finger and thumb construction allow seamless grip for higher dexterity and sensitivity.
  • Elastic on the wrist of the gloves allow a tight protective fit with turnout gear.

     

  • Manufactured in Holik facilities in Europe.
    NFPA® is a registered mark of the National Fire Protection Association. PORELLE® is the registered trademark of PIL Membranes Limited. DuPont™ and Kevlar®, Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
    Certified by SEI to comply with NFPA 1971, 2018 Edition.

    NFPACertified by SEI to comply with NFPA 1971, 2018 Edition.
    NFPA® is a registered mark of the National Fire Protection Association.


HOW TO MEASURE THE GLOVE SIZE

For selection of the proper glove size, hand shall be measured as follows:

Measure your index finger from the palm crease to the tip in millimeters and this will give you the closest numerical size.
The “size“ (number) is the length of the index finger in millimeters.

Now measure across the top of your knuckles. “N“ (normal) or “W“ (wide) is the palm width.

How to measure the glove size

Find the corresponding size/width based on the chart below.
Example: Size “76N“

Holík NFPA 1971, 2018 edition sizing

Holík NFPA 1971, 2018 edition sizing

Indicative guide of glove sizes

NFPA sizing Spec sizing
64N XS
64W S / short fingers
64XW M / short fingers*
70N S
70W M
70XW L / short fingers*
76N M / long fingers
76W L
76XW XL / short fingers*
82N L / long fingers
82W XL
82XW 2XL
82XXW 3XL*

Note: words “longer” and “shorter” refer to finger length.